Netgear Wi-Fi router R8000 setup using Netgear Genie

How do I use the Netgear Genie application to set up my Netgear WiFi R8000 Nighthawk router?

You can set up your Netgear WiFi R8000 Nighthawk router with the Netgear Genie application manually as well as automatically by using the Netgear Genie screens and menus. Before you begin with the routerlogin.net process of the setup, you should get your Internet Service Provider information. Netgear Genie app can run on any computing device with an internet browser and takes about 15 minutes approximately to complete with the basic setup and Installation.

Follow these instructions given below for setup of Netgear R8000 router:-

1. Firstly, turn on the Netgear WiFi R8000 router after connecting it to a power source.

2. Establish wireless or wired connections between your laptop, computer or wireless device and the Netgear WiFi R8000 router with an Ethernet cable (wired) or wirelessly using the default security and safety settings listed on the label of the WiFi router.

Note: In case if you wish to change the Netgear WiFi R8000 router’s wireless setting, you must use a wired connection to avoid being disconnected when the new settings of WiFi take effect.

3. Launch an internet browser from your laptop, computer or your wireless device which is connected to the network of your Netgear R8000 router.

4. When you set up the Internet connection for your WiFi router for the first time, the web browser goes to www.routerlogin.net, and the Netgear genie screen will get displayed.

5. Type www.routerlogin.net in the URL address bar of your internet browser which displays the Netgear WiFi router R8000 genie screen.

6. Follow the onscreen displayed instructions where Netgear genie guides you through connecting the Netgear WiFi R8000 router to the Internet.

If your internet browser is troubling you to display the web page www.routerlogin.net, do the following:-

1. Make sure that your computer or laptop is connected to one of the four LAN Ethernet ports i.e. through a wireless or a wired connection to your Netgear WiFi R8000 router.

2. Make sure proper power connection and supply of power indicated by the Power LED lit white and then try to access www.routerlogin.net Netgear official page for login and setup.

3. Close your current internet browser and reopen the web browser or try accessing the website URL www.routerlogin.net after clearing the cache of the browser.

4. Now browse to the URL www.routerlogin.com.

5. In case your computer or laptop has been set to a fixed or static IP address, you must change it to obtain an IP address automatically from the wireless router.

If your Netgear WiFi R8000 Nighthawk router does not connect to the Internet, then you can try the following measures:-

1. Review the settings of your network and make sure you that have selected the correct options and typed everything in a correct way.

2. Contact your Internet Service Provider to verify you have the correct setup configuration information.

Adding several devices to Netgear WiFi R8000 Nighthawk router:-

How do we install the printer driver and connect the printer to our Netgear Nighthawk WiFi router?

Follow these mentioned steps below to install the driver and connect the printer:-

1. Install the software driver for your USB printer on all the computers and laptops on your network connections that share the USB printer.

Note: in case you do not have the driver of the printer, you must contact your printer manufacturer.

2. Connect the USB printer to your Netgear WiFi R8000 router using a USB printer cable for connecting the USB printer to the wireless router USB port.

Some of the USB printer manufacturers (Lexmark and HP printers) recommended not to connect the USB cable until the installation software directs you to do so.

Robert Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games, internet and new media. He writes for Netgear Router products at netgear genie .

SOURCE-http://router-loginnet.com/netgear-wi-fi-router-r8000-setup-using-netgear-genie/

Netgear Wi-Fi router setup through Genie smart wizard

Netgear WiFi router is needed by the user to initially access the administrator login page using routerlogin.net web page. There, the user will be redirected to enter the default credentials regarding the WiFi router to access the Netgear Genie page to further configure the wireless router. It is highly recommended that the user initially logs in to their WiFi router in order to make their network more secure. The login process is very simple and it only takes a couple of minutes of the time of the user. The user can simply go to any web browser and type the default address in the URL bar i.e. routerlogin.net or the default IP address as well i.e. 192.168.1.1. By logging in to the WiFi router, the user will then gain access to the configuration page of the WiFi router and a lot of advanced features as well. With the help of the configuration settings, the user can make their network secure and by changing the advanced features, the user can personalize and configure their network which is most suitable to their requirements.

The user can find all the security settings on the configuration page of the WiFi router. The configuration page is called the Netgear Genie which helps the users set up their WiFi routers initially and further provides the user with a dashboard with the settings regarding their Netgear WiFi router. It is recommended that the user changes the default password and username for their WiFi router as the default information is provided online for ease of access regarding the login for all the users. Any unauthorized user can access the network of the user without their permission using the default credentials. After that, the user must upgrade the firmware for their WiFi router if there are any new updates available. The Netgear Genie notifies the user regarding the latest updates. The firmware is basically the Operating Software of the WiFi router. It helps orchestrates complete functions within the hardware of the WiFi router. The firmware update also rolls out multiple new features as well as enhances overall speed of the network of the user.

Here, we will help the users understand the configuration settings of their Netgear WiFi routers using the Netgear Genie. Here are the steps to log in and set up to the Netgear WiFi router using Netgear Genie:-

1. Connect the Ethernet cable from your modem to the WAN port located at the rear end of the Netgear WiFi router.

2. Now, using another Ethernet cable, connect the laptop or computer to any of the four internet ports located at the rear end of the Netgear WiFi router besides the WAN port.

3. Restart the router, the modem, and the computer and wait for the devices to finish restarting.

4. Open any web browser and type routerlogin.net in the address URL bar to access the Netgear Genie web page.

5. The user can even access the administrator login page using the default IP address as well. The IP address is 192.168.1.1 for most of the Netgear WiFi routers.

6. Once the user has the administrator login page on the screen, the user will be needed to enter the default credentials regarding their WiFi router. The default password is “password” and the default username is “admin” for most of the Netgear WiFi routers. The password and username will be case sensitive.

7. Once the user has successfully logged in to the WiFi router, the Setup Wizard will appear on the screen. The Setup Wizard will detect the type of connection of the internet that the user has.

8. For all the wired connections, the Smart Setup Wizard will detect the connection as Dynamic IP. Now click Next to proceed.

9. Now, the user will have the complete setup and logged in to their network without any issues. The user can now change the configurations of their WiFi router and access the advanced features as well from the page of Netgear Genie.

The Netgear router of the user will now be configured in a proper way. The user can start using their WiFi router as they desire.

John Woods is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games, internet and new media. He writes for Netgear Router products at
netgear genie .

SOURCE – http://router-loginnet.com/netgear-wi-fi-router-setup-through-genie-smart-wizard/